Many friends have broken door handles at home and want to replace them themselves. However, due to lack of experience, they may not know where to disassemble and what tools to use at first. Today, the stainless steel handle manufacturer's editor will teach you how to replace door handles. Let's take a look now:

1. First, you need to remove the old door handle. The anti-theft door handle was removed from inside the room because the two screws that fix the handle are inside. As long as you remove the screws, it's okay.

2. The process of dismantling is very simple. Open the door, press the outside with four fingers and the inside with your thumb (you can also have someone help you press this outside), and use a screwdriver to remove the screws. Be careful! When it's about to be removed, use some force to press it down because there are springs inside,

Accidentally, it may pop out or hit oneself.

3. After removing the screws, slowly remove the handle, then use pliers to open the snap ring on the handle and take out the handle. When doing this, be sure to pay attention to safety and not rush slowly. Because I don't have pliers at home, I didn't do this step, but it's also very simple.

4. Insert the new handle and fasten the snap ring. At this point, it is basically completed, and all you need to save is to install it onto your body. Install the handle in its original position.

5. Kind reminder: Be patient when installing, because there is a screw sleeve on the outside handle, and the screws must be aligned in order to be installed firmly. If you feel it is difficult to install, you can find someone to help support the outside handle, and slowly install it inside. As long as it is aligned, the other one will be easy to install.

Article source: Stainless steel handle manufacturer http://m.lfsyb.cn